Polaris Rzr Receiver Hitch



Polaris Rzr 1000 Xp/ XPT Receiver Hitch. This receiver hitch will only fit 2018 and up due to the bigger diameter bolt size (12mm). This will also fit the rzr turbo models, excluding the turbo s. You will reuse your factory hardware. It is very easy to install. It will come in raw metal. You can use any 2 inch hitch to move little trailers or wood splitters. There is an access hole to check your rear diff fluid. There is also two integrated tie down spots. All pieces are made out of 1/4″ thick metal.

THIS WILL NOT FIT RZR 900s or 1000s. Will not fit other 1000xp with the smaller bolt hole diameter. Please make sure your bolt size is 12mm before ordering.

If you have any questions feel free to send me a message.